Three-Phase SCR Power/Voltage Regulating Controller PAK06 Series

PAK06

Rated voltage: three-phase 380VAC (three-phase three-wire)
Trigger current: 300mA can trigger thyristors below 1000A
Auxiliary power supply: PCB board working power supply, AC220V±10% 50/60Hz
Control terminal L/N, N line must be connected to the neutral line
Input signal: control signal (0-5VDC, 0-20mA, 1-5VDC, 4-20mA) optional
Use environment: temperature -20-55℃; humidity below 90%RH
Withstand voltage: insulation withstand voltage AC2500V/1 minute
Input/output isolation voltage AC2000V
Alarm output: a group of normally open/normally closed output points (1A/250VAC)
Soft start and stop: soft start and soft stop time 1~41 seconds adjustable
Protection function: load phase loss detection, auxiliary power supply L/N reverse connection
Dimensions: 145×90×40mm

PAK06

PAK06 series
Model	PAK06
Rated voltage	3-phase 380VAC (3-phase 3-wire)
Trigger current	300mA can trigger thyristor of 1000A or below
Auxiliary power supply	PCB board operation power supply AC220V ± 10% 50/60Hz control terminal. The L/N and N wires must be connected to the neutral wire
Input signal	Control signal (0-5VDC, 0-20mA, 1-5VDC, 4-20mA) optional
Usage environment	Temperature -10-55°C, humidity below 99% RH
Withstand voltage strength	Insulation withstand voltage AC2500V/1 min, input/output isolation voltage AC2000V
Alarm output	1 set of NO/NC output point (1A/250VAC)
Start-stop time	Soft start and soft stop time 1-41s adjustable
Protection function	Load phase loss detection, auxiliary power supply L/N reversed connection
Boyut	145×90×40mm