주식 시장 ： 【301388.SZ】
메뉴
콘텐츠로 건너뛰기 
C-Lin 릴레이 시리즈 산업용 자동화 및 스마트 응용 프로그램을위한 포괄적 인 지능형 제어 솔루션을 제공합니다. 피복 시간 릴레이, 카운터, 액체 레벨 릴레이, 시간 제어 스위치, 소형 전자기 릴레이, 전력 규제 기관, 그리고 솔리드 스테이트 릴레이이 시리즈는 정확한 타이밍, 계산, 제어 및 보호 기능을 보장합니다.
높은 지연/카운트 정확도, 멀티 모드 기능, 광범위한 전압 호환성 (AC 50/60Hz ≤380V, DC 24V) 및 강력한 간섭 방지 성능과 같은 기능을 갖춘 C-LIN 릴레이는 제조, 스마트 주택, 전력 시스템 등에 널리 사용됩니다.
인증 GB/T14048.5, JB/T10047, 그리고 UL/CCC 표준,이 시리즈는 유연한 설치 및 글로벌 응용 프로그램을 지원합니다.
With a focus on proprietary technology, Xinling Electrical has obtained over 450 patents and 120 software copyrights.
2023 년에는 23 개의 발명 특허를 포함하여 88 개의 새로운 특허가 추가되어 기술의 고유 한 혁신을 크게 향상시키고 제품의 경쟁 우위를 향상 시켰습니다.
A time relay is a device that controls the timing of electrical events, opening or closing contacts after a predetermined time delay.
The primary difference between a standard relay and a timer relay is that a standard relay operates immediately upon receiving an electrical signal, whereas a timer relay introduces a delay before activating or deactivating its contacts.
A counting relay is designed to count the number of events or pulses in a circuit, activating its output after a specified count has been reached.
A meter counter works by tallying the number of electrical pulses it receives, often used to measure quantities like flow rate or production counts.
A liquid level relay monitors the liquid level in a container, activating or deactivating a pump or alarm when the liquid reaches a certain threshold.
A level relay for conductive liquids detects the level of conductive liquids, using the conductivity to complete a circuit and trigger actions like activating a pump or alarm.
To test a solid-state relay (SSR), begin with a visual inspection to check for any physical damage or loose connections. Next, verify that the input side of the SSR receives the correct control voltage. Use a multimeter to measure the output side, ensuring it responds appropriately when the control input is applied. Finally, connect the SSR to its intended load and confirm it operates as expected under normal conditions.
A solid-state relay operates by using semiconductor components to switch electrical circuits on or off without moving parts, providing faster and more reliable operation compared to electromechanical relays.
The main difference between a standard relay and a solid-state relay lies in their construction and operation: standard relays use electromagnetic coils and moving parts to open or close contacts, while solid-state relays rely on semiconductor components to perform the switching function, offering advantages like faster response times and longer lifespan.
A time relay is a device that controls the timing of electrical events, opening or closing contacts after a predetermined time delay.
The primary difference between a standard relay and a timer relay is that a standard relay operates immediately upon receiving an electrical signal, whereas a timer relay introduces a delay before activating or deactivating its contacts.
A counting relay is designed to count the number of events or pulses in a circuit, activating its output after a specified count has been reached.
A meter counter works by tallying the number of electrical pulses it receives, often used to measure quantities like flow rate or production counts.
A liquid level relay monitors the liquid level in a container, activating or deactivating a pump or alarm when the liquid reaches a certain threshold.
A level relay for conductive liquids detects the level of conductive liquids, using the conductivity to complete a circuit and trigger actions like activating a pump or alarm.
To test a solid-state relay (SSR), begin with a visual inspection to check for any physical damage or loose connections. Next, verify that the input side of the SSR receives the correct control voltage. Use a multimeter to measure the output side, ensuring it responds appropriately when the control input is applied. Finally, connect the SSR to its intended load and confirm it operates as expected under normal conditions.
A solid-state relay operates by using semiconductor components to switch electrical circuits on or off without moving parts, providing faster and more reliable operation compared to electromechanical relays.
The main difference between a standard relay and a solid-state relay lies in their construction and operation: standard relays use electromagnetic coils and moving parts to open or close contacts, while solid-state relays rely on semiconductor components to perform the switching function, offering advantages like faster response times and longer lifespan.
