Limit Anahtarları LX-D4C serisi

Ürüne Genel Bakış

LX-D4C serisi su geçirmez limit anahtarları, 250V'a kadar voltajlarda AC 50Hz veya 60Hz ve 220V'a kadar DC voltajlı devrelerde kullanıma uygundur. Kontrol, limit, konumlandırma, hareket, sinyal veya program değiştirme için kullanılırlar.

Bu limit anahtar serisi, kompakt boyut, hassas hareket ve yüksek hassasiyetle birlikte mükemmel toza, suya ve yağa dayanıklılık özelliklerine sahiptir.

Bu ürün serisi GB14048.5 ve IEC60947-5-1 standartlarına uygundur.

Ürün Özellikleri

Su Geçirmezlik Fonksiyonu

IP67 koruma sınıfıyla mükemmel toza, suya ve yağa dayanıklılık performansı.

Çalışma Özellikleri

Çalışma gücü OF (Maks): 17,65N (1800gf)

Sıfırlama kuvveti RF (Min): 4,41N (450gf)

Seyahat Öncesi PT (Maks): 1,8 mm

Diferansiyel hareket MD (Maks): 0,2 mm

Aşırı Uzaklık (Min): 3 mm

Çalışma konumu OP: 34,3±1 mm

SSS

Q1. What does a 0.2mm differential travel mean for stop-position accuracy?
Differential travel is the distance between the operate and release points. The LX-D4C’s maximum is 0.2mm, with maximum pretravel of 1.8mm, so the switching point repeats closely. This suits positioning stops, end-of-travel signals and program switching on automated lines. Send the required tolerance and we will check it against the datasheet.

Q2. How should the mounting height be set for the 34.3±1mm operating position?
Set the actuating dog or cam so the plunger reaches the 34.3±1mm operating position, and leave at least 3mm of overtravel beyond it. Do not let the moving part bottom out on the switch body. Send the stroke drawing and we will verify the mounting height and choose among the six models (1220, 1231, 1232, 1233, 1250, 1269).

Q3. Is IP67 sufficient for washdown, coolant or oil, and what are the temperature limits?
IP67 covers dust-tight and temporary immersion, and the series is also oil-resistant. It is not a rating for high-pressure, high-temperature washdown jets, so specify that separately if it applies. Operating range is -10℃ to +70℃ with no freezing, so it is not for cold storage. Contact us with the washdown conditions.

Q4. Will the LX-D4C withstand vibration and repeated impact on moving machinery?
Vibration resistance is 10Hz to 55Hz at 1.5mm double amplitude. Mechanical shock endurance is 500 m/s² and misoperation endurance is 200 m/s². Mechanical operating frequency is up to 120 times per minute, and electrical up to 20. For very high cycle rates, tell us the duty cycle.

Q5. Is a pilot batch possible for design validation before volume production?
Yes. The MOQ is 24 pcs, so pilot volumes are possible. Send the target application, models and expected monthly volume after validation. We will quote the pilot and the follow-on production quantity together, so pricing is clear before commitment.