Time Relay HHS5 Series

HHS5F

HHS5F3

HHS5P

Specification	HHS5	HHS5G	HHS5C	HHS5F	HHS5F1	HHS5F2	HHS5F3	HHS5R
Movement Forms	Power-on delay	Release delay	Power-on delay with momentary contact	Power failure delay				Cyclic delay
Delay Range	A:0.05s~0.5s/5s/30s/3m B:0.1s-1s/10s/60s/6m C:0.5s-5 /50s/5m/30m D:1s-10s/100s/10m/60m E:5s-60s/10m/60m/6h F:0.25m~2m/20m/2h/12h G:0.5m~4m/40m/4h/24h			0.1s-1s；0.2s-2s 0.5s-5s;1s-10s;2.5s-30s;5s-60s;10s-120s;15s-180s			60s-600s 180s-1800s 360s-3600s	0.5s~6s/60s1s~10s/10m2.5s~30s/30m5s~60s/60m
Setting method	Potentiometer
Repetition error	Er<1% when the delay range is greater than 1s; Dr<50ms when the delay range is less than 1s.			Er<5% when the delay range is greater than 1s; Dr<100ms when the delay range is less than 1s.				Er<1% when the delay range is greater than 1s; Dr<50ms when the delay range is less than 1s.
Number of contacts	Delay 2 conversion		Delay 1 conversion Momentary 1-conversion	Delay 1conversion	Delay 2 conversion	Delay 1 conversion Momentary 1-conversion	Delay 1conversion
Contact capacity	3A AC250V (resistive)
Operating power	AC380V,AC220V,AC110V,AC36V,AC24V, 50Hz;DC24V,DC110V,DC220V							AC110V,AC220V 5Hz;DC24V,(85%-110%）Ue
Temperature range	-5°-40°C
Altitude	≤2000m
Humidity	The relative humidity of the air is <50% at a maximum temperature of 40°C at the installation site, higher relative humidity may be permitted at lower temperatures, e.g. up to 90% at 20°C. Special measures should be taken for occasional condensation due to temperature changes.
Installation	Unit, panel and 35m rail mounting with different sockets and accessories.
Conventional heating current Ith	5A
Rated insulation voltage Ui	400V
Rated impulse withstand voltage Uimp	2.5KV
Ue/Ie	Rated Working Voltage Ue/Rated Working Current Ie:AC-15 Ue:AC250V,Ie:3A in each category of use.

HHS5F

HHS5 series time relays are suitable for use as time-delay elements in control circuits with AC 50Hz, operating voltages of 380V and below, or DC operating voltages of 24V, to connect or break circuits at preset times.

This series of relays has the advantages of small size, light weight, high precision, wide delay range, good performance and so on, which is widely used in automation control circuits for delay control.

This product meets the relevant requirements of GB/T 14048.5.

Wiring Diagram

Specification-HHS5F

Rated Supply Voltage	AC24V、AC36V、ACI10V、AC220V、 AC380V50Hz:DC24V、DCI10V、 DC220V:Allowable voltage fluctuation range (85%~110%)Ue
Time Delay range	1s、5s、10s、30s、60s、120s、180s
Repetition error	≤5%
Contact	One set of delay contacts with reset
Rated Load of the Contact	3A AC250V(Resistive)
Dimensions	40.5×54×84mm
Installation	Panel and 35mm rail mounting with different sockets and accessories.
Temperature	-5℃ to 40℃
Operating mode	Power off delay

HHS5F1

This product meets the relevant requirements of GB/T 14048.5.

Wiring Diagram

Specification-HHS5F1

Rated Supply Voltage	AC24V、AC36V、ACl10V、AC220V、 AC380V50Hz:DC24V、DCI10V、 DC220V:Allowable voltage fluctuation range (85%~110%)Ue
Time Delay Range	1s、5s、10s、30s、60s、120s、180s
Repetition Error	≤5%
Contact	2C time delay
Rated Load of the Contact	3A AC250V(Resistive)
Dimensions	40.5×54×84mm
Installation	Panel and 35mm rail mounting with different sockets and accessories.
Temperature	-5℃ to 40℃
Operating Mode	Power off delay

HHS5PA

This product meets the relevant requirements of GB/T 14048.5.

Specification-HHS5PA

Rated Supply Voltage	AC24V、AC36V、ACl10V、AC220V、 AC380V50Hz:DC24V、DCI10V、 DC220V:Allowable voltage fluctuation range (85%~110%)Ue
Time Delay range	0.1s-9.9s、1s-99s、0.1m-9.9m、1m-99m、 0.1h-9.9h、1h-99h
Repetition error	Er<1%when the delay range is greater than 1s;Dr<50ms when the delay range is less than 1s
Contact	A.Delay 2 convert B.Delay 1 convert,instantaneous 1 convert
Rated Load of the Contact	3A AC250V(Resistive)
Dimensions	40.5×54×75.5mm
Installation	Panel and 35mm rail mounting with different sockets and accessories.
Temperature	-5℃ to 40℃
Operating mode	Power off delay