Counting Relay DH48 Series

MOQ : 50

Working power supply: AC/DC24V; AC/DC100~240V; AC380V
Working mode: positive counting, 4-digit LED display
Counting speed: high frequency 100 times/second; low frequency 30 times/second
Counting range: (1-9999)×1, ×10, ×100 magnification
Input signal: contact signal counting
Output mode: N, C, F, R, X format
Power failure memory: memory can be set
Dimensions: 48×48×105mm
Opening size: 45×45mm
Installation method: panel type
Remarks: only contact signal counting is possible. If photoelectric switch/proximity switch counting is required, please choose HHJ1 model

DH48S

Specification	DH48S	DH48S-2Z	DH48S-2
Operating power	AC380V, 220V, 110V,36V,24V,50Hz, permissible voltage fluctuation range is (85%~110%) Ue
Operating Mode	Power-on delay
Counting range	0.01s~99.99s;1s~99m99s;1m~99h99m
Repetition error	Er<1% when the delay range is greater than 1s; Dr<50ms when the delay range is less than 1s.
Number of contacts	1 set of delayed transitions	Regular type: 2 sets of time-delay transitions Instantaneous type: 1 set of time-delay transitions, 1 set of instantaneous transitions	2 sets of time-delay transitions
Contact capacity	3A AC250V (resistive)
Temperature range	-5°-40°C
Ith	5A
Ui	400V
Uimp	2.5KV
Ue/Ui	Rated working voltage Ue/rated working current Ie:AC-15 Ue:AC250V,Ie:3A for each category of use.

DH48J

Specification	DH48J
Working power supply	AC/DC24V; AC/DC100~240V; AC380V
Working mode	Positive counting, 4-digit LED display
Counting speed	High frequency 100 times/second; low frequency 30 times/second
Counting range	(1-9999)×1, ×10, ×100 magnification
Input signal	Contact signal counting
Output mode	N, C, F, R, X format
Power failure memory	Memory can be set
Dimensions	48×48×105mm
Opening size	45×45mm
Installation method	Panel type
Remarks	Only contact signal counting is possible. If photoelectric switch/proximity switch counting is required, please choose HHJ1 model